Portable Multi-parameter Water Quality Meter LMPWM-A11 is adapted with different modes for measuring quality of water on different parameters such as pH, ORP, conductivity, TDS, salinity. Its memory can store & recall up to 500 sets of data. Due to its portable design, it is suitable for outdoor measurements i.e., on site water testing, remote area water testing & for research purposes. It is reliable and user friendly.
Request QuotepH mode |
|
||||||||||||||||
ORP measurement |
|
||||||||||||||||
Conductivity measurement |
|
||||||||||||||||
TDS measurement |
|
||||||||||||||||
Salinity measurement |
|
||||||||||||||||
Resistivity |
|
||||||||||||||||
Temperature compensation | 0 to 100 °C, 32 to 212 °F, Manual or Automatic | ||||||||||||||||
Stability conditions | Low or high | ||||||||||||||||
Calibration due | 0 to 31 days | ||||||||||||||||
Memory | Stores up to 500 data sets | ||||||||||||||||
Output | USB communication interface | ||||||||||||||||
Power supply | 3 × 1.5 V “AA batteries or DC 5 V power adapter | ||||||||||||||||
Dimension (L × W × H) | 185 × 88 × 32 mm | ||||||||||||||||
Weight | 300 g |
Portable multi-parameter water quality meter is used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote areas.
Temperature probe
Available Range :
pH mode : pH measurement range : (-2.000) to 20.000 pH ORP measurement : ORP measurement range : -1999.9 to 1999.9 mV Conductivity measurement : Conductivity measurement range : 0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm TDS measurement : TDS range : 0-100 ppt. (max. 200 ppt., depending on factor setting) Temperature compensation : 0 to 100 °C, 32 to 212 °F, Manual or Automatic pH mode : pH measurement range : (-2.000) to 20.000 pH ORP measurement : ORP measurement range : -1999.9 to 1999.9 mV Dissolved oxygen : DO concentration range : 0.00 to 20.00 mg/L Temperature compensation : 0 to 100 °C, 32 to 212 °F, Manual or Automatic pH mode :pH measurement range | (-2.000) to 20.000 pH |
pH accuracy | ± 0.002 pH |
pH calibration points | 1 to 5 points |
pH calibration solutions | USA, NIST, DIN or user defined |
Related Models :
Model | pH mode | ORP measurement | Conductivity measurement | TDS measurement | Salinity measurement | Resistivity | Temperature compensation | Stability conditions | Calibration due | Memory | Output | Power supply | Dimension (L × W × H) | Weight | ||||||||||||||||||||||||||||||||||||||||||||||||||
LMPWM-A20 | Array | Array | Array | - | - | - | 0 to 100 °C, 32 to 212 °F, Manual or Automatic | Low or high | 0 to 31 days | Stores up to 500 data sets | USB communication interface | 3 × 1.5 V “AA batteries or DC 5 V power adapter | 170×85×30 mm | 300 g | ||||||||||||||||||||||||||||||||||||||||||||||||||
LMPWM-A21 | Array | Array | - | - | - | - | 0 to 100 °C, 32 to 212 °F, Manual or Automatic | Low or high | 0 to 31 days | Stores up to 500 data sets | USB communication interface | 3 × 1.5 V “AA batteries or DC 5 V power adapter | 170×85×30 mm | 300 g | ||||||||||||||||||||||||||||||||||||||||||||||||||
LMPWM-A11 |
|
|
|
|
|
|
0 to 100 °C, 32 to 212 °F, Manual or Automatic | Low or high | 0 to 31 days | Stores up to 500 data sets | USB communication interface | 3 × 1.5 V “AA batteries or DC 5 V power adapter | 185 × 88 × 32 mm | 300 g | ||||||||||||||||||||||||||||||||||||||||||||||||||
LMPWM-A10 | - | - | - | - | - | - | 0 to 100 °C, 32 to 212 °F, Manual or Automatic | Low or high | 0 to 31 days | Stores up to 500 data sets | USB communication interface | 3 × 1.5 V “AA batteries or DC 5 V power adapter | 185 × 88 × 32 mm | 300 g |