Paper air permeability tester TP-J10 is designed to measure the air permeability under specified conditions with time & unit pressure difference. It measures the average air flow through the unit area of the sheets. It is incorporated with standard ‘Paper porosity method’ used to test paper permeability. It is suitable for paper porosity with 1 x10 ˉ ² to 1 x10 ² µ m/ (Pa · S) range, and not suitable for large rough texture paper.
Request Quote| Measuring range | 0 to 1000 ml/min |
| Test area | 10 ± 0.02 cm2 |
| Area differential pressure | 1 ± 0.01 kPa |
| Inner diameter of grip ring | 35.68 ± 0.05 mm |
| Dimension | 410×300×1160 mm |
| Weight | About 15kg |
Paper air permeability tester is used to measure air permeability of papers like cement sack paper, craft paper, cable paper, copy paper and industrial filter paper used in paper, packaging, craft industry.
Available Range :
Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm Sample (size) length : Diameter ≥30 mm, Thickness ≤ 40 mm Sample (size) length : 38×70 mm Sample (size) length : 90 to 200 mm Sample (size) length : 180 mm (180, 150, 100, 90, 50 mm adjustable) Sample (size) length : 0 to 200 mm adjustableRelated Models :
Whiteness and chromaticity tester TP-A10
Whiteness meter TP-A11
Tensile Stiffness Tester TP-B10
Automatic horizontal tensile tester TP-B11
Automatic horizontal tensile tester TP-B12
Vertical tensile tester TP-B20
Pulp beating (refining) freeness tester TP-C10
Water absorption tester TP-C20
Water absorption tester- Cobb Tester TP-C21
COBB sample cutter TP-C30
Coefficient of friction tester TP-D10
Electronic bending stiffness tester TP-E10
Paper and cardboard thickness meter TP-E20
Paper and cardboard thickness meter TP-E21
Ink rubber tester TP-F10
Standard strip cutter TP-G10
Softness tester TP-H10
Carton compression tester TP-I10
Carton compression tester TP-I11
Internal Ply bond Tester TP-J11
Puncture strength tester TP-J12
Paper tearing tester TP-J20
Electronic Tearing tester TP-J21
Mullen burst tester TP-K10
Mullen burst tester TP-K11
Crush tester TP-L10
Bekk Smoothness tester TP-L20
Folding endurance tester TP-M10
Digital Paper Thickness Tester TP-E30
| Model | Measuring range | Capacity | Resolution | Indication error | Tearing arm | Tearing angle | Chips distance | Clamp- paper | Resection length | Tearing distance | Frictional resistance | Pyramid dimension | Platen Size | Operating stroke | Compression speed | Impact angle | Unit | Error | Sample amount | Speed adjustment range | Track & force speed in stacking test | Test area | Area differential pressure | Inner diameter of grip ring | Dimension | Weight | Power supply |
| TP-A10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 V ± 10 %, 50 Hz |
| TP-A11 | - | - | - | ≤ 0.5 % | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 V ± 10 %, 50 Hz |
| TP-B10 | (1-500) mN.m (divided into 7 small ranges) | - | - | 0.02 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 V ± 10 %, 50 Hz |
| TP-B11 | 0 to 30, 0 to 100 N,0 to 300 N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 V ± 10 %, 50 Hz |
| TP-B12 | 0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 V ± 10 %, 50 Hz |
| TP-B20 | 0 to 30 N (tissue paper), 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220 V ± 10 %, 50 Hz |
| TP-C10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 450×250×1100 mm | - | - |
| TP-C20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 420×250×380 mm | - | - |
| TP-C21 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 270×400×300 mm | - | - |
| TP-C30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 240×288×435 mm | - | - |
| TP-D10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| TP-E10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 200×230×350 mm | 15 kg | AC220 V ± 10 % , 50 Hz |
| TP-E20 | 0 to 4 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 233×160×120 mm | 5.5 kg | - |
| TP-E21 | 0 to 20 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 233×160×120 mm | 5.5 kg | - |
| TP-F10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 275×302×297 mm | 25 kg | AC220 V ± 10 % , 50 Hz |
| TP-G10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 240×520×70 mm | 4 kg | - |
| TP-H10 | 10 to 1000 mN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 570×410×200 mm | 33 kg | AC220 V ± 10 % , 50 Hz |
| TP-I10 | 0.1 to 10 kN | - | - | < ± 1% | - | - | - | - | - | - | - | - | 500×500 mm (customized) | 500 mm (customized) | 10 mm/ min | - | - | - | - | 2 to 100 mm/ min | 2 mm/ min | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-I11 | 1 to 50 kN | - | - | < ± 1% | - | - | - | - | - | - | - | - | 800×800 mm/ 1000×1000 mm/ 1200×1200 mm/ 1500×1500 mm (customized) | 800 mm/ 1000 mm/ 1200 mm/ 1500 mm (customized) | 10 mm/ min | - | - | - | - | 2 to 100 mm/ min | 2 mm/ min | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-J10 | 0 to 1000 ml/min | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 ± 0.02 cm2 | 1 ± 0.01 kPa | 35.68 ± 0.05 mm | 410×300×1160 mm | About 15kg | - |
| TP-J11 | - | A: 20 to 500 J/m2 B: 500 to 1000 J/m2 | - | - | - | - | - | - | - | - | - | - | - | - | - | 90° | Lb-ft/in2 J/m2 | A: ± 1 J/m2 B: ± 2 J/m2 | 5 pcs | - | - | - | - | - | 700×340×600 mm | 92 g | - |
| TP-J12 |
A (1 to 6) J indicating error ± 0.05 J B (1 to 12) J indicating error ± 0.05 J C (1 to 24) J indicating error ± 0.05 J D (1 to 48) J indicating error ± 0.05 J The indicating errors w.r.t measurement range of 20 to 80 % |
- | - | - | - | - | - | - | - | - | <0.25 J | Three sides: 60×60×60 mm, height 25 ± 0.7 mm, Arris edge fillet radius 1.5 ± 0.1 mm | - | - | - | - | - | - | - | - | - | - | - | - | 800×470×840 mm | 185 kg | AC220 V ± 10 % , 50 Hz |
| TP-J20 | 0 to 1000 mN | - | 0.1 mN | ± 1 % | 104 ± 1 mm | 27.5° ± 0.5° | - | - | - | 43 ± 0.5 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| TP-J21 | - | 10 -16000 mN | 0.1 mN | - | 104 ± 1 mm | 27.5° ± 5° | 180 mm | 2.8 ± 0.3 mm | 20 ± 0.5 mm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 kg | - |
| TP-K10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 170 ± 15 ml/min | - | - | - | - | - | - | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-K11 | - | - | 0.01 kPa | - | - | - | - | - | - | - | - | - | - | - | 95 ± 5 ml/min | - | - | - | - | - | - | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-L10 | - | - | 1 N | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-L20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-M10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | AC220 V ± 10 % , 50 Hz |
| TP-E30 | 0 to 5 mm | - | - | ± 0.0025 mm or ± 0.5 % | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 Kg | - |
