Portable NO2 Gas Detector LPSG-A21 is a fast response and high accuracy gas measurement device with 0 to 1000 ppm range. Its internal sampling pump with fast sampling speed and high flow rate, ensures the accurate response time of the detector. Portable nature, small size ait offers role in special high intensity engineering plastic housing, suitable for different kinds of situation and environment. The gas concentration unit ppm and mg/m3 can be shifted quickly and also the local time can be shown on the screen.
Request QuoteGas detected | NO2 |
Detection principle | Electrochemistry |
Sampling method | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. |
Measure range | 0 to1000 ppm |
Resolution | 1 ppm |
Precision | 2 % fs |
Signal output | High-speed data transmission by USB, available for data downloading and printing |
Response time | ≤ 10 s |
Repeatability | ≤ ± 1 % |
Zero shift | ≤ ± 1 % (fs/year) |
Operating language | English |
Temperature | -20° C to 50 °C |
Explosion-proof | Exib ll CT4 |
Alarm mode | Sound, light, vibration |
Recovery time | ≤ 10 s |
Linearity error | ≤ ± 1 % |
Display | LCD dot matrix display |
Gas unit | Units are switchable |
Humidity | 0 to 95 % RH |
Degree of protection | IP66 |
Operating time | 100 h (pump off) |
Dimension | 205 × 75 × 32 mm |
Weight | 300 g |
Portable NO2Gas Detector is used in petrochemical and chemical industry, agriculture environment protection, electronic, food, pharmaceutical industry, bio-pharmaceutical plant, green household and fermentation process.
Available Range :
Sampling : With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection Measurement principle : Non-dispersive infrared (NDIR) Gas Detected : O2 CH4 CO2 VOC CO H2S SO2 CL2 NO2 NH3 Gas detected : Hydrogen Sulfide H2S Gas detected : Sulfur dioxide SO2 Gas detected : NO2Related Models :
Model | Gas detected | Detection principle | Sampling method | Measure range | Resolution | Precision | Signal output | Response time | Repeatability | Zero shift | Operating language | Temperature | Explosion-proof | Alarm mode | Recovery time | Linearity error | Display | Gas unit | Humidity | Degree of protection | Operating time | Dimension | Weight | ||||
LEGD-A10 | - | - | - | - | 1ppm | 3 to 10% F.S. | - | - | ≤ ± 1% | - | - | -20°C to 50°C | - | - | - | - | LCD dot matrix display | - | 0 to 95 % RH | - | - | - | 300 g | ||||
LIGD-A10 | - | - | - | - | - | - | - | 1 to 5 s | - | - | - | - | - | - | - | - | OLED self-luminous with low power consumption, high brightness | - | - | - | - | 500 × 290 × 180 mm | 0.7 kg | ||||
LMGD-A10 | - | Electrochemical principle (O2 CO H2S SO2 CL2 NO2 NH3) Infrared principle (CH4 CO) Photoionization principles (VOC) | Built-in stable flow pump, each flow pump is equipped in each independent module, pump flow is adjustable in ten steps, flow range: 0-800 mL/Min | - | O2: 0.01% VOL, CH4: 1 PPM, CO2:1 PPM VOC:1 PPM, CO:0.1 PPM, H2S: 0.1 PPM SO2: 0.01 PPM, CL2: 0.01 PPM, NO2: 0.01 PPM, NH3:0.01 PPM | 2% FS | - | - | ≤ ± 1% | ≤ ± 1% (F.S / Year) | - | - | - | Buzzer, red LED and alarm status prompt on the display, fault alarm, pump abnormal alarm, battery low battery alarm, shutdown alarm, fall alarm (optional) | - | ≤ ± 1% | 3.5 inch colour display, resolution 320×480 | - | - | IP66 | - | 260×230×120 mm | 3700 g | ||||
LPSG-A30 | Hydrogen Sulfide H2S | Electrochemistry | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. | 0-10ppm, 0-50ppm, 0-100ppm, 0-500ppm, 0-1000ppm, 0-2000ppm, 0-5000ppm, 0-10000ppm (option) | 0.001ppm (0-10ppm), 0.01ppm (0-50ppm,0-100ppm), 0.1ppm (0-500ppm), 1ppm (0-1000ppm) | 1 % fs | High-speed data transmission by USB, available for data downloading and printing | ≤ 10 s | ≤ ± 1 % | ≤ ± 1 % (fs /year) | English | -40° C to 70 °C | Exia II CT4 | Sound, light, vibration | ≤ 10 s | ≤ ± 1 % | LCD dot matrix display | Units are switchable | 0 to 95 % RH | IP66 | 100 hours (pump off) | 205 × 75 × 32 mm | 300 g (NW), 800 g (GW) | ||||
LPSG-A20 | Sulfur dioxide SO2 | Electrochemistry | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. | 0 to1000 ppm | 1 ppm | 2 % fs | High-speed data transmission by USB, available for data downloading and printing | ≤ 10 s | ≤ ± 1 % | ≤ ± 1 % (fs /year) | English | -20° C to 50 °C | Exib ll CT4 | Sound, light, vibration | ≤ 10 s | ≤ ± 1 % | LCD dot matrix display | Units are switchable | 0 to 95 % RH | IP66 | 100 h (pump off) | 205 × 75 × 32 mm | 300 g | ||||
LPSG-A21 | NO2 | Electrochemistry | Pumping suction, flow rate can up to 1L/min, ten grades of pumping suction for selection. | 0 to1000 ppm | 1 ppm | 2 % fs | High-speed data transmission by USB, available for data downloading and printing | ≤ 10 s | ≤ ± 1 % | ≤ ± 1 % (fs/year) | English | -20° C to 50 °C | Exib ll CT4 | Sound, light, vibration | ≤ 10 s | ≤ ± 1 % | LCD dot matrix display | Units are switchable | 0 to 95 % RH | IP66 | 100 h (pump off) | 205 × 75 × 32 mm | 300 g | ||||
LPTG-A10 | - | - | Diffusion | - | - | - | - | - | - | - | - | - | - | - | - | - | LCD display | - | - | - | - | - | About 250 g (includes detector, batteries) | ||||
LPSG-A10 | - | - | Diffusion | - | - | - | - |
|
- | - | - | - | - | - | - | - | LCD display | - | - | - | - | 125 × 66 × 42 mm | 105 g | ||||
LPMG-A10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||||
LNGD-A10 | - | Electrochemistry | Built-in pumping sampling, selected high-quality micro pump, low noise, low vibration, stable suction, Pump flow is adjustable in ten speeds, flow range: 0 to 500 ml/min | - | 0.01 % VOL | ≤±2 % FS | - | - | ≤ ± 1 % | ≤ ± 1 % (F.S / Year) | English | - | - | Buzzer, light and alarm status prompt on the display, low battery alarm | - | ≤ ± 1% | 3.5-inch IPS color LCD display, resolution 320 × 480 | - | - | IP66 | - | - | 400 g | ||||
LEGD-A11 | - | - | - | - | 1 ppm | 2% F.S. | - | - | ≤ ± 1% | - | - | -20°C to 50°C | - | - | - | - | LCD dot matrix display | - | 0 to 90 % RH | - | - | - | 2 Kg | ||||
LPVG-A10 | - | - | - | - | - | - | - | EX ≤ 20 s, O2≤ 30 s, CO ≤ 40 s, H2S ≤ 30 s | - | - | - | - | - | - | - | - | Dot Matrix Liquid crystal display | - | 15% to 95% RH | - | - | - | - | ||||
LPTG-A11 | - | Electrochemical detection principle | Built-in pump | - | SO2 0.001PPM, CO 0.001PPM | - | - | ≤ 20 S | ≤ ± 2% | - | - | - | - | - | - | - | - | - | - | - | - | - | 300 g | ||||
LPHG-A10 | - | Thermal Conduction | - | - | 0.01% vol | 2% FS | - | - | ≤ ± 1% | ≤ ± 1% (F.S / Year) | - | - | - | - | - | ≤ ± 1% | 3.5-inch color display | - | - | - | - | 270 × 75 × 41 mm | 400 g | ||||
LPNG-A11 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15% to 95% RH (No condensation) | - | - | - | 135 g | ||||
LAGD-A10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ≤ 1.7kg | ||||
LPMG-A11 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Color screen 2+2 digits LCD | - | - | - | - | - | 0.5kg |