Automatic Bomb Calorimeter LABC-A10
Calorimeter type : Isoperibol
Temperature range : 5 to 40°C
Measurement range : 5 to 40 MJ/ kg
Operation Mode : The outer barrel temperature is constant
Automatic Bomb Calorimeter LABC-A11
Calorimeter type : Isoperibol
Temperature range : 5 to 40°C
Measurement range : 5 to 40 MJ/ kg
Operation Mode : A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode
Automatic Bomb Calorimeter LABC-B10
Calorimeter type : Isoperibol
Oxygen filling : Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering
Bomb volume : 250 ml
Analysis time : < 8 min full test process:
Automatic Bomb Calorimeter LABC-B11
Calorimeter type : Isoperibol
Oxygen filling : Semi-automatic
Bomb volume : 282 ml
Analysis time : 15 to 25 min
Octane & Cetane Analyzer LOCT-A10
Test Liquids : Diesel, Gasoline
Measuring Range for Gasoline : Aviation gasoline: 86.0 to 105.0/MON Automobile gasoline: 50.0 to 115.0/RON
Measuring Range for Diesel : Automobile diesel oil: 25 to 75/CN
Measuring Accuracy : Aviation gasoline: ≤ ± 1.5/MON Automobile gasoline: ≤ ± 1.5/RON, ≤ ± 1.5/MON Automobile diesel oil: ≤ ± 2.5/CN, ≤ ± 2.5/CI Retest of regression samples: ≤ ± 0.5/RON, ≤ ± 0.5/MON Test of regression sample: ≤ ± 1.5/RON, ≤ ± 1.5/MON Calibration accuracy: ≤ ± 0.2/RON, ≤ ± 0.2/MON
Octane & Cetane Analyzer LOCT-A20
Measurement item : motor gasoline and diesel
measurement unit of octane is ON : 40 to 120
Permissible error of octane : ± 0.5 max
Fluctuate range of octane : ± 0.2 max
Octane & Cetane Analyzer LOCT-B10
Octane number range : 40 to 125 ON
Maximum error limit octane number : ±0.5 ON
Maximum parallel ON difference : ±0.2
Antiknock range : 0.5 to 15 %
Acid Number and Acidity Tester LAAT-A11
Ambient temperature : ≤ 35 °C
Relative humidity : ≤ 85 %
Precision of titration tube : Scale division is 0.02 ml
Total power consumption : ≤ 1200 W
Acid Number Tester LAAT-A12
Measurement range : ≥0.05 mg KOH/g
Potential measurement range : 0 to 1800.0 mV
Burette volume : 10 mL
Minimum titration volume : 0.001 ml
Base Number Tester LAAT-A13
Volumetric analysis : Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.02 ml
Automatic acid titration : Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.1 pH
Automatic potential control : Titration condensation: 0.1 N; Controlling accuracy: ≤ 10 mV
Ambient temperature : 0 ~ 35 ℃
Water Soluble Acid and Alkali Tester LAAT-A10
Graduated flask : 100 ml，50 ml
Conical flask : 100ml
Separatory funnel : 250ml
Ambient temperature : (-10 )°C to 35 °C
Aniline Point Tester LAPT-A10
Measurement range : Room temperature ~ 150°C
Stirring speed : 0 ~ 1200 r / min
Heating power : 25 W
Interior Dimension : 360 × 250 × 545 mm
Aniline Point Tester LAPT-A11
Temperature controlling accuracy : ≤ 0.5 ℃
Temperature controlling range : Room temperature ~ 200 ℃
Power supply for illumination : 5 V
Power of motor : 2 kW
Automatic PMCC Flash Point Tester LCFP-A11
Ambient temperature : 10 °C ~ 40 °C
Relative humidity : ≤ 80 %
Measurement Range : Ambient Temperature ~ 250 °C
Flash Point : Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C
Automatic PMCC Flash Point Tester LCFP-A12
Flash Point Determination Range : Ambient to 230℃
Accuracy : 0.1℃
Heating Rate : Procedure A: (5 to 6)℃/min Procedure B: (1 to 1.5)℃/min Procedure C: (3.0±0.5)℃/min
Stirring Rate : Procedure A and C: (90 to 120)RPM Procedure B: (250±10)RPM Automatic control and manually adjustable
Automatic PMCC Flash Point Tester LCFP-A13
Ambient Temperature : 10 ℃ to 35 ℃
Relative Humidity : < 85%
Ignition Mode : Electric Ignition
Cooling Method : Forced Air Cooling
Automatic PMCC Flash Point Tester LCFP-A14
Temperature Range : 0 ℃ to 60 ℃
Temperature Accuracy : ±0.5℃
Ambient Temperature : 15℃ to 35℃
Relative Humidity : ≤ 85%
PMCC Flash Point Tester LCFP-A10
Ambient temperature : ≤ 35 °C
Relative humidity : ≤ 85 %
Temperature range : 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C
Aperture of ignition device : 0.8 mm
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10
Ambient temperature : Room temperature to 35 °C
Relative humidity : ≤ 85 %
Timing range : 1 s to 9 min 59 s
Temperature controlling range : Room temperature to 99.9 °C
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11
Ambient temperature : Room temperature to 35 °C
Relative humidity : ≤ 85 %
Temperature controlling range : Room temperature to 99.9 °C
Temperature controlling accuracy : ± 1 °C
Density Tester LDMT-A10
Cubage of bath : Ф300 × 380 mm
Temperature controlling range : 0 °C ~ 100 °C
Temperature controlling accuracy : ± 0.2 °C
Temperature sensor : Industrial platinum resistance, Pt100
Automatic Distillation Apparatus LADA-A10
Heating power : 2 kW
Cooling power : 0.5 kW
Steam temperature : 0 to 400℃
Oven temperature : 0 to 500℃
Benzene Distillation Tester (Low Temperature) LDT-A11
Ambient temperature : -10°C to 35°C
Relative humidity : ≤ 85 %
Thermometer : Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C
Scale division : 0.1 ℃
Distillation Tester (low temperature Double units) LDT-A16
Graduated flasks : 100 ml
Distillation flask : 125 ml
Ambient temperature : ≤ 35 °C
Relative humidity : ≤ 85 %
Distillation Tester (low temperature single unit) LDT-A17
Graduated flasks : 100 ml
Distillation flask : 125 mL
Ambient temperature : ≤ 30 °C
Relative humidity : ≤ 85 %
Distillation Tester Dual Units LDT-A15
Graduated flasks : 100 ml
Scale division of graduated flask : 1ml
Distillation flask : 125 ml
Ambient temperature : ≤ 35 °C
Distillation Tester Front Type LDT-A14
Distillation flask : 125 mL
Ambient temperature : Room temperature to 35 °C
Relative humidity : ≤ 85 %
Thermometer : (-2 )°C to 300 ℃ and (-2) °C to 400 ℃
Distillation Tester LDT-A10
Graduated flasks : 10 ml and 100 ml
Scale division of graduated flask : 10 ml is 0.1 ml and 100 ml is 1 ml
Ambient temperature : (-10) °C ~ 35 °C
Relative humidity : ≤ 85 %
Distillation Tester LDT-A12
Graduated flasks : 100 ml
Scale division of graduated flask : 1 ml
Outer diameter of distillation flask : φ65
Refrigeration tube : φ14
Vacuum Distillation Tester LDT-A13
Ambient temperature : 5 °C to 35 ℃
Relative humidity : ≤ 85 %
Cubage of buffer vessel : 1000 ml
Max. Residual pressure : ≤ 2 mm Hg
Vacuum Distillation Tester LDT-A18
Evaporation tube specifications : 200 Φ mm
Evaporation tube heat transfer area : 0.4 m2
Built-in cooling area : 0.5 m2
Constant pressure feeding bottle : 3 L
Dropping Point Tester (Air bath) LDPT-A11
Ambient temperature : ≤ 35 ℃
Relative humidity : ≤ 85 %
Heating power of electric furnace : 250 W × 2
Total power consumption : ≤ 700 W
Dropping Point Tester (Oil Bath) LDPT-A10
Beaker quantity : 600 ml
Ambient temperature : (-10) °C ~ 40 °C
Relative humidity : ≤ 85 %
Thermometer Measurement range : (-5) °C ~ 300 °C
Engler Viscometer LEV-A10
Graduated Flask : 200 ± 0.2 ml
Standard Water Value : 51 ± 1 s
Temperature Range : 0 ~ 100 °C
Temperature Controlling Accuracy : ± 0.2 °C
Engler Viscometer LEV-A11
Graduated Flask : 100 ml
Standard Water Value : 51 ± 1 s
Temperature Range : 0 ~ 100 °C
Temperature Controlling Accuracy : ± 0.1 °C
Engler Viscometer LEV-B10
Graduated Flask : 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials)
Standard Water Value : 51 ± 1 s
Temperature Range : 0 ~ 100 °C
Ambient Temperature : 10 °C ~ 40 °C
Existent Gum Tester LEGT- B30
Bath type : Oil bath
Bath capacity : 5000 ml ± 50 ml
Ambient temperature : Room temperature to 35 °C
Relative humidity : ≤ 85 %
Existent Gum Tester LEGT- B31
Evaporation bath type and size : Aluminum block bath, φ260 × 130 mm
Holes for testing : 3 pieces
Size of holes for testing cylinder : φ51 × 70 mm
Flow rate display : Flow meter
Existent Gum Tester LEGT- B32
Evaporation bath type and size : Aluminum bath φ260 × 130 mm
Holes for testing : 5 pieces
Size of holes for testing cylinder : φ51 × 70 mm
Working temperature : 160 ℃ ~ 165℃
Kinematic Viscometer LKV-A10
Ambient temperature : 15 to 35°C
Relative humidity : ≤ 85%
Capillary viscometer : 6 capillary Pinkevitch viscometer tubes
Stirring motor : 1200 rpm
Kinematic Viscometer LKV-A11
Ambient temperature : (-10) °C ~ 35 °C
Relative humidity : ≤ 85 %
Capillary viscometer : 11 pieces
Stirring motor : 6 W, 1200 rpm
Kinematic Viscometer LKV-A12
Ambient temperature : (-10) °C ~ 35 °C
Relative humidity : ≤ 85 %
Capillary viscometer : 11 pieces
Stirring motor : 6 W, 1200 rpm
Kinematic Viscometer LKV-A13
Ambient temperature : (-10) °C ~ 35 °C
Relative humidity : ≤ 85 %
Capillary viscometer : 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group
Stirring motor : 6 W, 1200 rpm
Kinematic Viscometer LKV-A15
Ambient temperature : (-10) °C ~ 35 °C
Relative humidity : ≤ 85 %
Capillary viscometer : 11 pieces
Stirring motor : 6 W, 1200 rpm
Kinematic Viscometer LKV-A16
Ambient temperature : 0 ~ 40 ºC
Relative humidity : 20 ~ 90 %, RH while 40 ℃
Temperature controlling accuracy : ± 0.1 °C
Timing range : 0.0 s ~ 9999.9 s
Low Temperature Kinematic Viscosity Tester LKV-A14
Ambient temperature : ≤ 30 °C
Relative humidity : ≤ 85 %
Capillary viscometer : 13 pieces
Stirring motor : 6 W, 1200 rpm
Automatic Pour Point Tester LLTT-A23
Ambient temperature : ≤ 30 ℃
Refrigeration speed : > 40 °C / 10 min
Repeatability for solidifying point : ≤ 2 °C
Repeatability for pour point : ≤ 3 °C
Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12
Ambient temperature : (-10)℃ ~ 35 ℃
Relative humidity : ≤ 85 %
Sample cup Inner diameter : 31.0 ~ 32.0 mm
Sample cup Wall thickness : 1.0 ~ 1.5 mm
Freezing Point Tester LLTT-A11
Freezing Point Range : -54℃ to 2℃
Cold Bath Temperature Range : -70℃ to 30℃
Temperature Accuracy : ±0.1℃
Refrigerator System : Imported Refrigerator Compressor
Multifunctional Low Temperature Tester LLTT-A16
Refrigeration system : New-type refrigeration compressor
Controlling temperature of cold trough : Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C
Ambient temperature : ≤ 30 ℃
Relative humidity : ≤ 85 %
Pour and Cloud Point Tester LLTT-A14
Chamber quantity : 2 chambers
Chamber 01 temperature control : Ambient to -51 ℃
Chamber 02 temperature control : Ambient to -65 ℃
Temperature precision : ±1°C
Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
Refrigeration system : New-type refrigeration compressor
Controlling temperature of cold trough : Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C
Ambient temperature : ≤ 30 ℃
Relative humidity : ≤ 85 %
Solidifying Point Constant Temperature Water Bath LLTT-A10
Capacity : 20 L
Temperature range : Ambient +5°C to 100°C
Precision : ± 0.1℃
Stirring range : 1200 r/min
Solidifying Point Tester ('-20°C +80°C') LLTT-A22
Temperature controlling accuracy : ± 0.5 °C
Refrigeration system : New-type refrigeration compressor
Cold trough : One trough with two baths, temperatures in two baths are equal
Controlling temperature of cold trough : Room temperature ~ (-70) °C
Solidifying Point Tester (Solidifying Point and Cold Filter Plugging Point) LLTT-A21
Refrigeration system : New-type refrigeration compressor
Cold trough : One trough with two baths, temperatures in two baths are equal
Controlling temperature of cold trough : Room temperature ~ (-70) °C
Ambient temperature : ≤ 30 ℃
Solidifying Point Tester LLTT-A13
Temperature controlling accuracy : ± 0.5 ℃
Refrigeration system : New-type refrigeration compressor
Cold trough : Two holes in one trough, and same temperature
Ambient temperature : ≤ 30 ℃
Solidifying Point Tester LLTT-A20
Temperature controlling accuracy : ± 0.5 °C
Refrigeration system : New-type refrigeration compressor
Cold trough : One trough with two baths, temperatures in two baths are equal
Controlling temperature of cold trough : Room temperature ~ (-70) °C
Automatic Cleveland Open Cup Flash Point Tester LOFP-A12
Ambient Temperature : 10 ℃ ~ 40 °C
Relative Humidity : ≤ 80 %
Temperature Measurement- Full Scale : Ambient temperature to 300 °C
Temperature Measurement- Repeatability : ≤ 8 °C
Automatic COC Flash & Fire Point Tester LOFP-B10
Ambient Temperature : 10 ℃ ~ 40 ℃
Relative Humidity : ≤ 85 %
Temperature Measurement- Full Scale : Ambient temperature to ~ 400 ℃
Temperature Measurement- Repeatability : ≤ 4 ℃
Cleveland Open Cup Flash Point Tester LOFP-A11
Thermometer : 6 ℃ ~ 400 ℃
Scale Division : 2 °C
Spout Aperture : 0.6 ~ 0.8 mm
Ambient Temperature : -10 ℃ ~ 50 ℃
Open Cup Flash Point Tester LOFP-A10
Thermometer : 0 ℃ ~ 360 °C
Scale Division : 1 °C
Ambient Temperature : ≤ 35 °C
Relative Humidity : ≤ 85 %
Automatic Lubricating Oils Oxidation Stability Tester LOST-D10
Samples : 2
Oil bath cubage : 30 L
Angle between bomb and water surface : 30 °
Speed of rotary assembly : 100 ± 5 RPM
Biodiesel Oxidation Stability Tester LOST-D14
Temperature Range : RT to 150 ℃
Temperature Accuracy : ±0.1℃
Temperature Control : PID digital display temperature controller
Sample Volume : 5 g
Distillate Fuel Oil Oxidation Stability Tester LOST-D12
Samples : 8
Temperature : 100 ℃
Temperature controlling accuracy : 0.1 ℃
Flow meter : 3 ± 0.3 L / H oxygen
Gasoline Oxidation Stability Tester LOST-D13
Type : Compact; Desktop
Design : Integrated
Bath : Metal bath (without water usage)
Temperature control point of metal bath : 100℃ ± 1℃
Oxidation Stability Tester (Lubricating Grease) LOST-D20
Temperature Range : Ambient to 150℃
Temperature Precision : ± 0.1°C
Test Unit : 2 units
Heating Power : 1800 W
Transformer Oil Oxidation Stability Tester LOST-D11
Samples : 6
Temperature controlling mode : Automatic digital temperature
Temperature controlling range : Room temperature ~ 160 °C
Temperature controlling accuracy : ± 0.2 °C
Oxygen Bomb Calorimeter LBC-C20
Heat capacity : 14000 ~ 15000 J / K
Temperature measurement range : 10 ~ 35 ℃
Repeatability error : ≤ 0.2 % (Grade C)
Endured pressure in oxygen bomb : 20 MPa
Oxygen Bomb Calorimeter LBC-C21
Temperature controlling range : 10 ℃ ~ 35 ℃
Temperature resolution : 0.001 ℃
Mean value of heat capacity : 15 kJ / K
Ambient temperature : 20 ℃ ± 5 ℃
Oxygen Bomb Calorimeter LBC-C22
Temperature measurement range : 10 ~ 35 ℃
Repeatability error : ≤ 0.2 % (Grade C)
Endured pressure in oxygen bomb : 20 MPa
Operation environment temperature : 15 ~ 28 ℃
Carbon Residue Tester (CONRADSON METHODS) LRCT-B10
Porcelain crucible : 30 ml
Inner iron crucible : 75 ml
Outer iron crucible : 190 ml
Burner : Mig Burner
Carbon Residue Tester (Digital Temperature Controlled Electric Furnace Methods) LRCT-B11
Bath type : Four holes with a furnace
Heating type : Electric resistance furnace
Temperature controlling range : 0 ~ 520 °C
Temperature controlling accuracy : ± 5 °C
Carbon Residue Tester (Ramsbottom) LRCT-B20
Coking furnace : Metal furnace
Heating mode : Electric heating
Test unit : 5 units
Temperature range : Ambient to 550°C
Copper Strip Corrosion Tester LRCT-A13
Sample hole : 4 pieces
Sample quantity : 4 to 12 pieces
Ambient temperature : Room temperature to 35 °C
Temperature controlling range : Room temperature to 100°C
Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10
Sample hole : 2 pieces
Speed of stirring motor : 1400 rpm
Ambient temperature : 10 to 35°C
Temperature controlling range : Room Temperature to 100°C
Lubricating Oil Rust Characteristics Tester LRCT-A11
Sample hole : 4 pieces
Speed of stirring motor : 1400 rpm
Speed for sample stirring : 1000 ± 50 rpm
Ambient temperature : Room temperature to 35°C
Rust Characteristics and Corrosion Tester LRCT-A12
Sample hole : 4 pieces
Ambient temperature : Room temperature to 35°C
Temperature controlling range : 0 to 100°C
Temperature controlling accuracy : ± 1°C
Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11
Air flow rate : Not less than 150 L / h
Max. Preset time : 99 min 59 s (100 min)
Chamber diameter of oven : Φ22 mm
Heating power of oven : 1400 W × 2
X-ray Fluorescence Sulfur in Oil Analyzer LST-A10
Sample quantity : 2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm)
Measurement time : 60, 120, 240, 300, and 600 s at random
Measurement range : 7 ppm to 5 %
Repeatability : < 0.029 (S + 0.6)
Petroleum Products Vapor Pressure Tester（REID METHODS) LVPT-C11
Test bomb : Two samples or a group of parallel samples
Bath temperature : 37.8 °C
Temperature controlling accuracy : 0.1 °C
Dimensions : 500 × 560 × 680 mm, 950 × 540 × 720 mm
Vapor Pressure Tester (REID METHOD) LVPT-C10
Operation temperature of water bath : RT ~ 90 °C
Temperature controlling accuracy : ± 0.1 °C
Dimensions : 550 × 520 × 102 mm
Pressure meter accuracy : ± 0.4 % kPa
Coulometric Karl Fischer Titrator LWT-A30
Ambient Temperature : 10°C to 35°C
Measurement Range : 0 to 100 mg
Resolution : 0.1 µg
Max. Electrolysis Speed : 40 µg /s
Coulometric Karl Fischer Titrator LWT-A31
Maximum current : 400 mA
Measurement range : 3 µg to 9999.9 µg
Resolution : 0.1 µg
Precision 1 : ± 2 µg (3µg H2O to 20µg H2O)
Coulometric Karl Fischer Titrator LWT-A32
Measurement Range : 1 µg to 200 mg
Electrolytic Current Control : 0 to 400 mA
Sensitive Valve : 0.1 µg H2O
Accuracy : 10µg to 1000μg, ±3μg More than 1mg but not greater than 0.3%
Crude Petroleum Water Content Tester LWT-B10
Ambient Temperature Range : -10 to 35°C
Relative Humidity : ≤85%
Distillation Flask : 1000 ml
Receiver : 5 ml, with 0.05 ml graduation
Volumetric Karl Fischer Titrator LWT-A20
Measuring range : 30 ppm to 100%
Resolution : 0.01 ml
Repeatability : ˂ 0.01
Moisture display resolution : 1 ppm
Volumetric Karl Fischer Titrator LWT-A21
Measuring range : 10 ppm to 100%
Resolution : 0.001 ml
Repeatability : ≤ 0.005
Moisture display resolution : 1 ppm
Water Content Tester LWT-A10
Ambient Temperature Range : ≤ 35°C
Relative Humidity : ≤ 85%
Heating Mantle Cap Power : 1000 W
Sample Determination : 1 at a time
Water Content Tester LWT-A11
Ambient Temperature Range : ≤ 35°C
Relative Humidity : ≤ 85%
Heating Mantle Cap Power : 1000 W × 2
Sample Determination : 2 at a time
Automatic Tag Closed Flash Point Tester LACF-A10
Experimental temperature range : -50 to 70°C
Test sample volume : 50 ml
Ambient temperature range : 10 to 40°C
Humidity : ≤ 85%
Specific Gravity Tester LSGT-A10
Vessel Volume : 4000 ml × 2
Power of Vacuum pump : 160 W
Negative power : 3.7 kPa（27.75 mmHg）
Power of shaking machine : 30 W
Automatic Dielectric Tester LADT-A10
Capacity : 2.0 kVA
Speed of voltage increase : 2 k V/ s
Voltage inspection accuracy : 0.01
Breakdown sensitivity : < 0.1 kV
Automatic Softening Point Tester LSPT-A10
Measurement range : 32 ℃ to 160 ℃
Ambient temperature : 35 °C
Temperature resolution : 0.01 ℃
Beaker volume : 1000 mL
Automatic Thermogravimetric Analyzer LTGA-A10
Temperature range : Room temperature to 1000 ºC
Temperature resolution : 0.1 ºC
Temperature fluctuation : ±0.1 ºC
Heating rate : 1 ~ 80 ºC / min
Automatic Thermogravimetric Analyzer LTGA-A11
Temperature Range : Room temperature to 1600℃
Temperature Resolution : 0.01℃
Temperature Fluctuation : ±0.1℃
Heating Rate : 0.1 to 100℃/min
Penetrometer LMPT-A10
Measurement range : 0 to 600 penetration scale
Timing controller : 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec
Time accuracy : ± 0.1 seconds
Resolution : 0.01 mm
Penetrometer LMPT-A11
Measurement range : 0 to 600 penetration scale
Timing controller : 5 sec or 60 sec
Time accuracy : ± 0.1 seconds
Resolution : 0.01 mm
Penetrometer LMPT-A13
Measurement range : 0 to 600 penetration scale
Timing range : 0 sec to 60 sec
Time accuracy error : ≥ ± 0.1 seconds
Resolution : 0.1 penetration
Foaming Characteristics Tester LFCT-A10
Temperature Range : Ambient to 100°C
Temperature Precision : ± 0.1°C
Air Flow : 94 mL ± 5 mL/min, with flowmeters
Timing Unit : 0 to 99 min 59 s, resolution 1 s
Mercaptan Sulfur Tester LMST-A10
Potential measuring range : (0 to ±1999.5) Mv
Intrinsic error : 0.1 % ±0.5 mV
Input impedance : Ri ≥1 × 1012 Ω
Burette capacity : 10 mL
Constant Temperature Needle Penetration Tester LTNP-A10
Measuring range : 0 to 700 taper degree (digital display table 0-70 mm)
Timing device : Timing error is less than ±0.1 s
Resolution : 0.01 mm
Needle insertion accuracy : ±1 cone insertion degree
Automatic Crude Oil Salt Content Analyzer LCOS-A10
Measuring range : Temperature: -5.0°C to 105.0°C pH: 0.00 to 14.00 mV: -1800 to 1800
Resolution : Temperature: 0.1°C pH: 0.01 mV: 0.1
Basic error : Temperature: ±0.3°C ± 1 word pH: ±0.01 ± 1 word mV: ±0.03% FS
Control temperature : 60°C ±1°C
Oil Separation Apparatus LOSA-A10
Test unit : 2
Sieve aperture : 75 µm
Pressure display : Precision digital pressure gauge
Cooling method : Totally enclosed compressor cooling
Mechanical Impurity Tester (Weight Method) LMIT-A21
Dimension : 390 x 260 x 590 mm
Total power consumption : ≤ 1200 W
Power supply : AC 220 V ± 10 %, 50 Hz
Heating power of water bath : 1000 W
Wax Oil Content Tester LWCT-A22
Power supply : AC 220 V ± 10 %, 50 Hz
Temperature controlling range in water bath : RT ~ 90 ℃ ± 5 ℃
Cooling bath temperature : (-35) ℃ ± 1 ℃
Evaporation temperature : 35 ℃ ± 1 ℃
Oil Breakdown Voltage Tester LIBT-A23
Power supply : AC 220 V ± 5 % , 50Hz
Measurement range : 0 ~ 75 kV
Voltage rising rate : 3 kV ± 10 % / s
Distance between electrodes : 2.5 mm
Color Tester LCT-A20
Light source : 220 V, 100 W
Temperature of grinding milk white light bulb : 2750 ± 50 K
Light hole( Φ14) : 26 pieces
Color comparing tube : Φ32 mm
